Home ProductsAsphalt Roofing Felt

0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface

Certification
China Cangzhou Jiansheng Building Waterproof Material Co.,Ltd certification
China Cangzhou Jiansheng Building Waterproof Material Co.,Ltd certification
Customer Reviews
you provide us with good quality product and superior service. we witnessed the improvement and development of your company, each time we have any reqirement, you will try your best to make our satisfied. thanks for your cooperation.

—— Andrew

I'm Online Chat Now

0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface

0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface
0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface 0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface

Large Image :  0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface

Product Details:
Place of Origin: China
Brand Name: Jianda
Model Number: ASTM D-4869 15# 30#
Payment & Shipping Terms:
Minimum Order Quantity: 300 rolls
Packaging Details: packed in rolls with blank craft paper or customized
Delivery Time: 10--15 work days
Payment Terms: L/C, T/T
Supply Ability: 1000 rolls per day

0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface

Description
Type: Roof Felt Materail: Organic Mat, Asphalt
Area:: 432sq. Ft / 216 Sq. Ft Tear Strength:: 2.5N, 2.0N
Surface: Smooth Thickness: 0.4mm--1.2mm
High Light:

asphalt felt paper

,

asphalt roofing paper

ASTM Standard 15# Roofing Tar Asphalt Roofing Felt Wooden Roof Underlayment

 

Introduction:

 

Asphalt Saturated Organic Felts are designed as an underlayment product to be applied over the roof deck prior to the installation of asphalt shingles. Install Asphalt Saturated Organic Felts as a secondary barrier to moisture caused by wind-driven rain and ice damming.

 

Type: Roofing Felt Place of Origin: Hebei China (Mainland) Brand Name: Jianda
Model Number: ASTM material: Asphalt,craft paper thickness: 0.4---1.0mm
specification: 36in*72ft usage: underlayment Watertightness: no transmission
Tensile: 133,9 +/- 59,5 N Mass: 238,8 +/- 1,3 g/m2 color: black

Application:

 

1.The first layer of Felt rolls must be installed to cover the entire bottom edge of the roof deck to facilitate the water shedding ability of the Felt.

2.Install fasteners at least eight inches at the top and middle edges and at the eave along the deck.

3.At slopes 4:12 and greater, a single layer of Felt rolls shall be installed parallel to and starting at the eaves, over lapped at least two inches, and fastened sufficiently to hold in place.

4.Continue to install the next course of Felt from the roof edge and overlap with the previous course as described above, according to the roof slope. If a new roll is required to complete the installation to the end of the roof, overlap the new roll over the prior roll by at least four inches. Use the same fastening pattern for the top, the middle and the bottom of the roll for all subsequent courses

5. The top of each subsequent course should be fastened intermittently to hold the edge in place until the next course is applied. Make certain to secure the fasteners at the bottom of the next course to hold the top of the previous course.

6.In valleys, lay a vertical section of the Felt in the middle, along the length of the valley prior to installing a horizontal course of the Felt. If more than one section of Felt is installed in the valley, start at the bottom and overlap the top section by at least two inches to ensure proper shedding of water.

0.4mm--1.2mm Thickness Asphalt Roofing Felt ASTM Standard 15# With Smooth Surface 0

Storage/Care:

 

We recommend that the rolls be kept in a dry area out of the weather. If you are applying the felt in cold weather, we recommend storing it in a warm place at least 24 hours before applying to roof.

 

 

 

Application/Use:

Organic felt is an underlayment and moisture barrier between the primary roof (for example asphalt shingles) and the roof decking. It is not intended to be a primary roof. We recommend that the primary roof be installed immediately after the application of the felt.

 

 

Model Width Length Thickness Weight Qty/pallet Qty/20'GP Load in bulk
ASTMD4869#15 36inch 144feet 0.4mm 30lbs 52rolls 1040rolls 1400 rolls
ASTMD4869#30 36inch 72feet 0.7mm 30lbs 52rolls 1040rolls 1400 rolls
ASTMD226 #15 36inch 144feet 0.6mm 50lbs 30rolls 600rolls 800 roll
ASTMD226 #30 36inch 72feet 1.2mm 50lbs 30rolls 600rolls 780 rolls

Contact Details
Cangzhou Jiansheng Building Waterproof Material Co.,Ltd

Contact Person: Angela

Tel: 008615511775265

Send your inquiry directly to us (0 / 3000)