|Product Name:||Self Adhesive Impermeable Membrane||Type:||Waterproof Membrane|
|Application:||Peel And Stick||Tensile Strength:||≥500N|
|Appearance:||PE Film/Colored Sand/Aluminum Foil||Width:||1m Or Be Cut Into Smaller Width|
|Length:||10m Or As Required||Thickness:||1.0mm,1.2mm,1.5mm,2.0mm,3.0mm|
|Usage:||Waterproofing In Building||On Shelf:||12 Month|
sbs impermeable membrane,
impermeable sbs modified bitumen waterproofing membrane,
1.0mm sbs modified bitumen waterproofing membrane
SBS Self Adhesive Bitumen Waterproof Sheet Impermeable Membrane
Self Adhesive Waterproof Membrane Introduction:
Self adhesive waterproof membrane is also named self adhesive polymer modified bitumen waterproof membrane. Its base materials are SBS elastomer, good road bitumen and tackifier. Its upper side is black PE film or Aluminum foil or Colored film. The picture on the description is Aluminum foil surfaced self adhesive membrane.
Self Adhesive Roofing Felt Features:
1.Self adheisve waterproof membrane is widely used because its self adhesive formulation makes safe, easy and fast installation.
2.Anti-puncture, anti-tension, good elongation, anti-corrosion.
3.Good flexibility under low temperature.
4.Widened membranes can reduce loss.
Self Adhesive Waterproof Membrane Usage :
1.Industrial and civil building roofing, underground, pool, tunnel, wooden and metal roofing.
2.Especially in the chemical factory, grament factory, and granary.
3.Tape can be used for sealing all construction material surfaces.
Self Adhesive Roofing Felt Specification:
|Reinforcement||Polyester fabric/Fiberglass fabric/No reinforced|
1.Do not apply waterproof membranes when bad weather, such as raining, snowing, and strong wind.
2.Do not apply on dirty, wet, dustry or humid surfaces.
3.Do not remove the roll from its packaging until the moment of application.
Contact Person: Angela