Self Adhesive Bitumen Waterproof Membrane with Various Finish
There are two types of self adhesive rubber-modified asphalt waterproofing membrane. One is self adhesive rubber-modified asphalt waterproofing membrane. This kind of membrane is made of synthetic rubber and resin modified asphalt with special modifiers. Polyester fiber is functioned as reinforcement, polyethylene film is the surface material or no film (double-sided self adhesive), made of silicone oil anti-adhesive isolation film. Another kind PET self adhesive rubber asphalt membrane is made of PET polyester film, self adhesive rubber asphalt material, silicone oil anti-adhesive isolation film.
|Water impermeability pressure Mpa≥
||1.2mm to 2.0mm or as required
|Operating Temperature short periods
|Tear Resistance N/50mm
|Pear Adhesion N/M
Scope of use
Can be widely used in various industrial and civil building roofs, basements, tunnels, bridges and reservoirs.
Waterproofing of civil air defense projects, subways, planted roofs and other projects.
1.Extremely strong base layer "self-preventing channeling" performance. The coil binder forms an interface interpenetrating network with polymer cement slurry and silicate. The polymer cement slurry can flow and penetrate and impregnate before the initial setting, and the solidification strength will gradually increase. The enhanced adhesion can limit the leakage caused by the damage of the membrane to a local area and avoid the overall failure of the waterproof layer.
2.Self adhesive rubber modified asphalt waterproofing membrane waterproofing system not only adheres firmly to the special polymer cement slurry, but also effectively connects with the concrete structure to form a polymer cement slurry waterproof layer→self adhesive rubber modification asphalt waterproof membrane→trinity waterproof structure with self waterproof layer.
3.Simple application and environmental protection.
4.Good integrity: the seams of the membrane materials are very reliable whether they are lap joints or flat joints (lap joints are suggested), the waterproof layer has high strength and certain extension performance, good material stability and good corrosion resistance, long lasting.
How to apply:
Grassroots cleaning→Brushing the grassroots treatment agent→Node strengthening teeatment→Positioning→Elastic line→Unrolling membrane→Rolling and exhausting→Overlapping treatment→Node sealing→Inspection and acceptance.
1.Sealed and packaged in special plastic bags, stored in a dry and ventilated environment to prevent sun and rain.
2.Different types and specifications should be stacked separately, and should not be inclined or cross-pressured.
3.Rolls should be laid flat, the stacking height should not exceed four layers, and the shelf life is one year.
4.Keep away from fire sources during transporation and storage.
»Q1. What’s your product range?
A1:As a factory ,We mainly produce SBS membranes, waterproof coatings, geotextiles and other construction waterproof materials.
»Q2. Can I order samples?Are you free for samples?
A2: Yes, we will offer free sample. You pay the sample cost first, but we will pay you back when you make the bulk order later.
»Q3. What's your delivery time?
A3:We are manufacturer, so we can efficiently control the production time, usually our delivery time is 10-25 working days.
»Q4. What's your payment terms?
A4:30% on deposit, 70% balance against copy of B/L after loading. L/C is available.
»Q5. Can you produce the product according to customers’ requirements?
A5: Sure, we are professional manufacturer, OEM and ODM are both welcome.