|Item:||SBS Waterproof Membrane||Type:||Mineral Particle Finish|
|Tensile Strength:||500N-800N/50mm||Color:||Varied With Finish Material|
|Mineral Color:||Grey/Green/Blue/Red Or As Required||OEM:||Welcomed|
|Customer's Label:||Welcomed||Core Felt:||Long Fiber Polyester Fabric|
|Product Warranty:||20-30 Years||On Shelf Life:||12 Months|
mineral particle self adhesive membrane waterproofing,
modified self adhesive roofing membrane,
bitumen self adhesive roofing membrane
Mineral Particle Modified Bitumen SBS Waterproof Membrane
SBS waterproof membrane
|Brand Name||Hebei Jianda|
|Surface Material||Slivery Al foil||Al film||PE Film||Sand||Mineral|
|Mid Layer||Modified Bituminous layer|
|Bottom Layer||PE Film|
|Reinforcement||Polyester Mat/ Fiberglass Mat/|
|Application||Torched on application.|
|Normal Packing||Packed in rolls with or without pallets.
1.Long-side lap joint: The longitudinal lap width of the material should be ≥80-100mm, and it must be carefully operated. The adhesive should be evenly applied without missing. Excess adhesive should be squeezed out at the edges of cold-bonded coils. The hot-melt method should form an asphalt strip on the edge.
2.Short side overlap: Both ends of the coil must be fully bonded. The overlap width should be ≥80-100mm. When using polyester reinforcement rolls for spot bonding or empty laying. Both ends must be fully glued at least 500mm. Cold bonding method: Adhesive should be squeezed out at the joint. Hot bonding method: Asphalt strips should be squeezed out at the joints.
3.When two adjacent coils are laid on the same layer, the lateral overlapping edges should be staggered by more than 500mm, and the upper and lower layers of coils are not allowed to be laid perpendicular to each other.
4.The mineral layer should be removed when the short side of the mineral sheet coil is lapped. The method is to use a flame to heat it and scrape off the mineral with a trowel. Docking can also be used. The method is to put a 300mm coil strip under the seam. The coils are butted horizontally. The joints are treated with sealing material.
5.After the roll material is laid, the end of the lap joint and the winding head part of the roll must be sealed. It should be filled with sealing coil, sealing glue or cold adheisve, and then smoothed to form a clear asphalt strip.
Package transportation and storage
The product is packed by plastic bag or adhesive tape.
Thickness:2-4mm width:1.0mm length:7.5mm 10mm
During storage and transportation, keep the package well,
put them in a dry ,airy place, keep away from direct sunlight, acids, alkalis,
oil and organic solvents.The shelf life is 12 months under normal storage and transportation
condition. After that period, the product can still be used if it complies with all the items in the specifications.
Welcome to send inquiry!
Contact Person: Angela