|
Product Details:
|
| Size: | 1mx10m/15m/20m | Thickness: | 1.0mm,1.2mm,1.5mm,2.0mm |
|---|---|---|---|
| Back Surface: | Black Release Film | Reinforcement: | Polyester Fabric/Fiberglass Fabric/No Reinforcement |
| HS Code: | 6807100000 | Usage: | Building Waterproof Material |
| Composition: | Bitumen, SBS Rubber, Fabric | After-sale: | Online Technical Support |
| Design Style: | Traditional | Lifespan: | More Than 15 Years |
| High Light: | modified bitumen waterproof membrane,polymer bitumen waterproof membrane,1.0mm bitumen waterproof membrane |
||
Self Adhesive Polymer Modified Bitumen Waterproof Membrane Roofing Felt
Self adhesive roofing felt introduction:
Self adhesive polymer modified bitume waterproof membrane is based on synthetic rubber such as SBS rubber, high quality bitumen and tackifier. This self adhesive roofing felt is made of PE film/Aluminum film/isolation film as the upper surface material, and the lower surface is covered with the silicon-coated isolation film as the release layer.
Self adhesive roofing felt application:
1 Roof, garden and basement.
2. Swimming pool, tunnel, reservoir, parking lot and so on.
Specifications
| Item | Self adhesive roofing felt | |
| Brand | JIANDA or cutomized brand or logo | |
| Width | 1000mm | |
| Length | 10/15m/20m | |
| Reinforcement | No reinforcement | Polyester/Glass fiber |
| Thickness | 1.0mm-4mm | 1.0mm-4mm |
| Surface |
Polyethylene film Fine Sand Non woven fabric Color film Double-sided self adhered |
Polyethylene film Fine Sand Non woven fabric Color film Double-sided self adhered |
Technical information
| Water impermeability (Mpa ≥) | 0.3 |
| Thickness (mm) | 1.0mm to 4mm |
| Softening point | 110°C |
| Operating Temperature short periods | -20°C+90°C |
| Elongations(%*) | ≥300 |
| Tear Resistance N/50mm | ≥200 |
| Peel Adhesion N/M | 1576 |
| Flexibility | -20,-25°C |
Self adhesive roofing felt features:
1. Self adhesive, without fire or bonding agent.
2. Excellent binding property.
3. Good tensile strength, puncture resistance and corrosion resistance. Good high and low temperature resistance, good bonding performance.
4. Simple, safe and environment friendly.
Installation procedure
Installation preparation → Substrate treatment → coat related substrate primer → detail additional waterproof layer installation → set datum line → main selfadhesive membrane installation → exhaustion of air and surface rolling (steel wheel) → overlaps compaction and edges sealing → vertical membrane terminals fix and sealing by membrane sealant inspection → installation of protection and insulation layer
Contact Person: Angela
Tel: 008615511775265
