|Material:||Self-adhesive Bitmen Waterproof Membrane||Type:||Waterproof Membrane|
|Usage:||Subway Waterproof Project||Advantage:||Easy Apply|
|Apply Method:||Wet Applied||Thickness:||1.0mm 1.5mm,2.0mm|
|Uppler Surface:||Isolation Film||Lower Surface:||AL, PE Film,HDPE Film|
wet asphalt membrane,
asphalt membrane for wooden roof,
asphalt membrane 1.5mm
Wet Applied Roof Underlayment Self Adhesive Bitumen Waterproof Membrane For Wooden Roof
Self adhesive bitumen waterproof membrane introduction:
Self adhesive polymer modified asphalt waterproofing membrane is based on SBS synthetic rubber, high-quality asphalt and tackifier as the base materials, polyester film (PET), polyethylene film (PE), aluminum foil or silicon coated isolation film as the upper surface material, and the silicon isolation film as the anti adhesion layer on the lower surface. It is a new type of waterproof material with great development prospect. It has the characteristics of low temperature flexibility, self-healing and good bonding performance. It can be applied at normal temperature, with fast construction speed and meeting the requirements.
Self adhesive bitumen waterproof membrane features:
1. No binder, no need to heat up to melt, just tear off the isolation layer, can be firmly bonded to the base. The construction is convenient and the construction speed is extremely fast.
2. It has rubber elasticity and excellent elongation, which can adapt to the deformation and cracking of base course.
3. It has excellent adhesion to the base course, and the bonding force is often greater than its shear force (fracture outside the bonding surface), so as to ensure that the lap joint is tight, reliable and seamless.
4. The unique "self-healing function" can self heal small puncture damage. When encountering puncture or hard objects embedding, it will automatically integrate with these objects to maintain good waterproof performance.
5. In addition to the main material, the surface material polyethylene film also has excellent waterproof performance and high strength, so the waterproof has double insurance.
6. Corrosion resistance: the coil has good acid, alkali and chemical resistance, and has excellent aging resistance in various environments.
Self adhesve bitumen waterproof membrane use area:
1.underground waterproofing building, subway,tunnel,basement and so on.
2.industrial and civil building, swimming pool, parking lot, bridge, reservior, canal, especially ised for the waterproof engineering which can not use the open flame.
|thickness||1.0mm, 1.5mm, 2.0mm|
|roll length||10m, 15m, 20m|
|apply method||peel off the isolation film and then stick the membrane to substrate|
|package||packed in rolls with adhesive tape of customized|
Contact Person: Angela