Product Details:
|
Type: | Roofing Felt | Usage: | Roofing Underlay |
---|---|---|---|
Material: | Asphalt, Paper | Roll Size: | 36in*144ft, 36in*72ft |
Surface: | Smooth | Thickness: | 0.4mm 0.6mm |
High Light: | small rolls of roofing felt,roofing tar paper rolls |
15 Roofing Felt Asphalt Saturated Organic Roofing Felt Roll Waterproof Sheet
Introduction
asphalt roofing felt is a heavy-weight asphalt roofing felt made of a specially formulated organic sheet which has been fully saturated with waterproofing asphalt.
Roofing felt (felt paper,asphalt felt paper) is a sheet material(raw paper) saturated with asphalt,similar totar paper,used in building construction.the term felt comes from the historical method of making the base material.Felt is an unwoven fabric that is produced by matting fibres under pressure.The fibres form the structure of the fabric.
Characteristics
Anti-leaking and tearing: passed 110 mph wind test and 4-hour water spray test with cap and roofing nails.
Lightweight: faster and quicker, 432/216 sq.ft coverage per roll, easy to carry and easy installation.
Excellent tensile: CD>=300N MD>=300N
Endurance: up to 120 days exposure for roof finishing
Wrinkle free: lay flat, stay flat, but flexible
Anti-skidding: textured surface provide good walking surface during installation
Specification: Roll width=91.4cm Roll length=44m Unit weight=200--1200 gams/m2
(Size and other specification can be changed as required)
Asphalt roofing felt is conformity with ASTM standards of the USA
The specifications of the roofing felt are ASTMD-4869#15 ,4869#30 and ASTMD-226#15 ,226#30,.
The roofing felt is widely used as underlayment which is under asphalt shingles. Its saturation rate is 100%,that’s to say, both water and air cannot enter.
Product Advantage
1 asphalt waterproof roof underlay felt
2 good at water-resistence, anti-aging
3 eco-friendly roof felt
4 ASTM D-4869I II; ASTM D-226I II
Usage:
Widely used as an underlay beneath asphalt shingles, wood shakes, tiles and other sloped coverings. it can also used as prectection layer in
construction project.
Test item |
ASTM D-226 15# |
ASTM D-226 30# |
ASTM D-4869 15# |
ASTM D-4689 30# |
Pliability at 23±2°C.tested shall not crack when bent 90° at a uniform speed over a rounded corner of radius in table for each |
12.7mm (radius) |
12.7mm (radius) |
12.7mm (radius) |
12.7mm (radius) |
Tear strength at 23±2°C min | 2.5N | 2.5N | 2.5N | 2.5N |
Breaking strength at 23±2°C min MD | 30LBF/in | 40lbf/in | 30lbf/in | 40lbf/in |
Breaking strength at 23±2°C min CD | 15lbf/in | 20lbf/in | 15lbf/in | 20lbf/in |
Loss on heating at 105°Cfor 5h max | 4.0% | 4.0% | 6.0% | 6.0% |
Width of the roll | 36 in | 36 in | 36 in | 36 in |
Area of the roll | 432 ft2 | 216 ft2 | 216 ft2 | 216 ft2 |
Net mass of saturated felt,min | 570 g/m2 | 1250g/m2 | 380g/m2 | 640g/m2 |
Saturation,%by wt., min | 120% | 150% | 100% | 120% |
Contact Person: Angela
Tel: 008615511775265