|
Product Details:
|
| Roll Width: | 1m | Roll Length: | 10m |
|---|---|---|---|
| Thickness: | 3mm,4mm Or Customized | Overlapping: | 10 Cm Or As Required |
| Back Surface: | Black PE Film | Top Finish: | Black PE Film/Aluminum Foil/Sand |
| High Light: | roof membrane under shingles,asphalt waterproofing membrane |
||
SBS Modified Bituminous Waterproofing Membrane for Multi-layer Waterproofing Systems
Introduction
It is SBS (Styrene Butadiene Styrene) modified, torch-on elastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with sand, aluminum foil or natural or colored slate chippings(mineral stones).
Fields of Application
It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, reatining walls, concrete channles as well as bathrooms and any wet surfaces.
Features and benefits
1.Applicable on different kind of surfaces at cold temperature because of high elastic property.
2.Has high elongation and tensile strength.
3.Resistant to aggressive effect of the soil.
4.Easily applied to the details such as dilation.
5.Edges of chimney and papapet returns.
| Surface Material | Slivery Al foil | Al film | PE Film | Colored sand | Schist |
| Middle Layer | Modified Bituminous layer | ||||
| Bottom Layer | PE Film | ||||
| Type | APP/ SBS | ||||
| Length/Roll | 10m/Roll | ||||
| Width/Roll | 1m/Roll | ||||
| Thickness/Roll | 2.0mm/3mm/4mm | ||||
| Reinforcement | Polyester Mat/ Fiberglass Mat | ||||
Contact Person: Angela
Tel: 008615511775265
