|
Product Details:
|
| Item: | Torch Applied SBS Waterproof Membrane | Standard: | GB18242-2008 |
|---|---|---|---|
| Top Finish: | Mineral Granule | Under Side: | Burn-off Black PE Film |
| Roll Size: | 1mx10m/as Required | Thickness: | 3mm/4mm |
| High Light: | roof membrane under shingles,asphalt waterproofing membrane |
||
3mm 4mm Mineral Granulated Cap Sheet for Flat Concrete Roofs
Product Overview:
It is an SBS -modified bitumen cap sheet for use in approved multi-ply membrane waterproofing assemblies. It is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modifed bitumen and is reinforced with a tough, dimensionalyy stable non-woven polyester mat. The top side is surface with mineral granules and under side is surfaced with polyethylene burn-off film to optimize heat welding.
|
Applied standard
|
GB12848-2008 |
|
Roll size
|
10 м² (10m x 1m .) |
|
Thickness:
|
3mm,4mm |
|
Flexibility at low temperature:
|
≤ - 20 ˚C |
|
Resistance to high temperature:
|
≥ + 95˚C |
|
Tensile strength – longitudinal/transversal:
|
800/500 -30 ( N/50mm) |
|
Elongation at break - longitudinal/transversal:
|
40/40 ±5 % |
|
Use:
|
Used for water protection in underground parts of buildings and for waterproofing of flat roofs |
| Installation method |
Heat welded
|
Installation
Prior to installation, unroll the product onto the surface and allow to relax. Position the product in desired position and back roll it. And then heat welded to approved substrate. For more additional application guidelines, please refer to our installation instructions.
Storage
Store rolls on end and maintain in an upright position to prevent damage. Store rolls in a clean dry location and cover as necessary to protect rolls from environmental damage such as extreme cold, heat, or moisture. Monitor varying environmental conditions during storage, handling and application.
Contact Person: Angela
Tel: 008615511775265
