Product Details:
|
Thickness: | 2.0mm | Length: | 15m |
---|---|---|---|
Roll Coverage: | 15m2 | Roll Weight: | 30kg |
Tensile Strength: | 200N | Heat Resistance: | 95degree |
High Light: | peel and stick roofing felt,peel and stick roofing paper |
2mm SBS waterproof membrane Adhesive Roof Underlayment Roofing Felt for Tunnel
Introduction:
2mm SBS waterproof membrane adhesive roof underlayment roofing felt for tuuel is a normal temperature applied ,self-adhesive, flexible bituminous waterproof sheet based on premium rubber bitumen adhesives, and reinforced with glass fiber mesh or non-reinforced, bottom surface protected by PE release film, top surfaced coated with PE film, HDPE sheet, aluminum foil or mineral slates.
Advantage:
1. self-adhesive, just peel to apply, super easy to install
2.high elastic, easy to apply, supper fit for all kinds of structure
3. anti-aging formula, specific formula, long service life than usual SBS/APP bitumen membrane
4.ISO, reliable quality, keep your project safe and sound
5. low temperature flexbility can be -30degree, suitable for cold area.
Storage:
1. store rolls on horizontal position to prevent damage
2. avoid sun-backed and rain
3. store rolls in a clean dry location
4. add cover as necessary to protect rolls from environmental damager, heat, cold or moisture ect.
Where to apply:
Self-adhesive waterproof membrane can be used as waterproofing layer for the roofing or underground projects, its full adhesive back make it pretty easy to apply. it is a best choice for your roof or underground projects.
Physical Reqirement:
tensile strength | 200N/50mm |
peeling strength | 25N |
pole peeling strength | 110N |
heat resistance | 95degree, no flowing, no crack |
low temperature flexibility | -20degree |
waterproofness | 0.3Mpa, 120 min watertight |
racking strength between membrane | 1.0 |
exudation | 2 |
stickness, min | 15 |
Contact Person: Angela
Tel: 008615511775265