|
Product Details:
|
| Application: | Flame | Usage: | Roof Waterproof |
|---|---|---|---|
| Surface: | PE Film/PE Film | Thickness: | 3mm, 4mm |
| Base Felt: | Polyester | Low Temperature: | -10degree, -20degree |
| High Light: | asphalt roof membrane,asphalt waterproofing membrane |
||
Torch Applied SBS Modified Asphalt Roofing Membrane Bitumen Waterproof Sheet
Introduction:
SBS modified bituminous waterproof membrane is a high performance elastomeric waterproofing membrane which combines the ability to withstand high ambient temerature with the usual characteristics of an SBS membrane with high flexibility at low temperature that makes it easy to apply at sub-zero temperatures.
Features and Benefits:
Need to know before applying:
1. a coat of weberdry prime should be first applied
2.the membrane shoule be first unrolled and positioned correctly on the surface to be treated
3.each roll should overlap the adjacent roll by 10cm
4.once the roll has been positioned correctly, the membrane should be rolled up again, taking care not to change its orientation
Specifications:
| type | waterproof membrane |
| usage | waterproofing for wall, floor and roof |
| reinforcement | polyester, fiberglass |
| thickness | 2mm, 3mm, 4mm, 5mm |
| surface | PE film, aluminum foil, mineral granule |
| low temperature flexibility | -10degree, -20degree, -25degree |
| tensile strength | 350N---500N |
| soluble content | 2100--3500g/m2 |
| heat resistance | 95degree--105degree |
| not permeable 30min | 0.3mpa |
| elongation | 30% |
Contact Person: Angela
Tel: 008615511775265
