Product Details:
|
Type: | Waterproof Membrane | Usage: | Roof, Tunnel Waterpoof |
---|---|---|---|
Reinforcement: | Composite Felt | Surface: | Aluminum Film , PE Film |
Package: | Packed In Rolls With Pallet | Main Market: | Worldwide |
High Light: | sbs modified bitumen membrane,sbs modified bituminous membrane |
4mm Waterproof Roofing SBS Modified Bitumen Roofing Membrane Roll Felt
Introduction:
SBS modified bitumen waterproof membrane is made of SBS rubber modified petroleum pitch as the cover layer. It is made of polyester fiber non-woven fabric, jute cloth, glass fiber felt, etc. as the tire base, and plastic film is used as the anti-stick isolation The layer is processed and processed through materials selection, batching, co-melting, staining, compound molding, and curling.
Advantage:
SBS modified asphalt waterproof membrane, this membrane has very good high temperature resistance, can be used in the temperature range of -25 to +100 ° C, has high elasticity and fatigue resistance, and up to 1500% Elongation and strong puncture resistance, tear resistance. It is suitable for waterproofing in cold areas, as well as industrial and civil buildings with large deformation and vibration.
Specifications:
According to the reinforcement , it can be divided into two categories: polyester tire and glass fiber tire. According to the covering material, it can be divided into four categories: PE film (aluminum plating film), colored sand, shale sheet, and fine sand. Width: 1000mm, with widths of 10m and 15m; thickness: polyester felt coil 3mm, 4mm, 5mm; glass fiber felt coil 3mm, 4mm; glass fiber reinforced polyester felt coil 5mm
Use Area:
Scope of application: It is widely used in waterproofing and waterproofing of roofs, basements, and toilets in industrial and civil buildings, as well as roof gardens, roads, bridges, tunnels, parking lots, and swimming pools. Projects with large deformation are recommended to use polyester tire products with excellent elongation performance, and other buildings should choose relatively economical glass fiber tire products.
soluble content | 2900g/m2 |
thickness | 3mm |
heat resistance | 90degree, no flowing |
low temperature | -20degree, no crack |
not permeable 30min | 0.3Mpa |
pull strength | 500N |
elongation | 30% |
reinforement | polyester |
Contact Person: Angela
Tel: 008615511775265