Product Details:
|
Product Type: | Red Sand Finish SBS Waterproof Membrane | Usage: | Building Waterproofing |
---|---|---|---|
Thickness: | 4mm | Roll Size: | 1mx10m |
Top Surface: | Red Sand | Bottom Side: | Heat-welded Black PE Film |
High Light: | sbs elastomeric bitumen membrane,self adhesive bituminous waterproofing membrane |
4mm Thickness Red Sand Finish SBS Waterproofing Membrane Torch Applied
Description:
Red sand finish SBS waterproof membrane takes SBS (styrene-butadiene-styrene) elastomer modifed bitumen mixed with additives as base materials, using premium polyester fabric as reinforcement, and covered with red sand as upper surface material. It is widely used in building waterproof projects, gives the roof waterproofing function and appears a beautiful look.
Usage:
1.Extensively used in the waterproofing projects of industrial and residential buildings at the roofs, walls, basements, roads, bridges, tunnel, parking lot, swimming pools.
2.When used in large deformation projects, it is suggested that we should choose polyester reinforced type.
Specification:
Thickness
|
4mm |
Width
|
1m |
Length
|
10m, 8m |
Base felt
|
Polyester fabric |
Surface
|
Red sand |
Application
|
Torched down |
Item | Property Parameter | ||
Polyester (PY) felt | |||
Tensity | Tension | longitudinal≥800N | |
transverse≥500N | |||
Elongation | longitudinal≥30% | ||
transverse≥30% | |||
Heat Resistance 90℃,2h | Dip-coat without slide,flow,drip | ||
Low temperature flexibility -25℃ | ≤3mm No crack | ||
>3mm No crack | |||
Impermeability | Pressure | ≥0.3MPa | ≥0.2MPa |
Time | ≥30Min | ≥30Min |
Contact Person: Angela
Tel: 008615511775265