|Roll Size:||1m*20m||Roll Weight:||36kg|
|Tensile Strength:||300N||Surface:||Isolation Film|
self adhesive roofing felt for sheds,
self adhesive flat roof felt
SBS Modified Self Adhesive Roofing Felt Waterproof Membrane Wet Applied
Self-adhesive polymer modified asphalt waterproofing membrane is a new kind waterproofing product.
It is made from synthetic rubber such as SBS, road asphalt and tachifier and so on. its upper surface coated with polyester fil,
polyethylene film, aluminum foil or sky silicon insulation film, the lower surface is coated with silicon coated insulation film as release
1. cold applied, no need flame, no need adhesive , energy saving, environmental, economical
2. good low temperature resistance
3: good bending performance
4. with the self-healing function, the joint itself can be used for the same lifetime as the membrane
5. construction is more conveninent.
1. non-exposed roof and underground engineering waterproofing project.
2.canals and swimming pools waterproofing
3.waterproof fpr sinwau engineering by cut our method
4.it is quite suitable for waterproof projects where can not use flame
5.excellent low temperature performance is more suitable for cold areas.
Applying key points:
1.substrate reqirements: the substrate should be flat, free of bulges, looseness, no sanding, no peeling and no dust. the moisture of the grass rooys should be less than 9%
2.Node processing: for eaves corner, gutter, wall corner, water drop, deformation joints and other special parts, make additional layers with self-adhesive coils.
3.Lap width: The overlap width is 80mm
|upper surface||PE film|
|lower surface||silicon release film|
|heat resistance||70degree, no sliding, no flowing|
Contact Person: Angela