Product Details:
|
Usage: | Roof Deck Waterproof | Color: | Black, Grey, Green, Red, Blue |
---|---|---|---|
Surface: | PE/PE, PE/M, PE/AL | Smell: | No Smell |
Standard: | GB-18242 | Low Temperature: | -15degree |
High Light: | roof membrane under shingles,asphalt waterproofing membrane |
3mm 4mm Waterproofing Material Asphalt Roofing Membrane Asphalt Roof Felt
Introduction:
SBS modified bituminous waterproofing membrane produced from high quality bitumen mass, enriched with elastomers (SBS), reinforced with pad of polyester felt and protected on both sides with polyethylene burn-off film. Roofing membranes are reinforced with polyester and fiberglass mat offering superior flexiblity, excellet tensile strength and dimensional stability Polyglass sbs modified bitumen membranes are meant to be part of a multi-ply roof system.
Usage:
Waterproof for various industrial and civil construction roofing engineering; Underground
waterproofing and damp proofing for industrial and civil engineering; Waterproof for indoor swimming
pool and fire pool, and so on;Waterproof for municipal engineering such as subway, tunnel, concrete
road surface, sewage works and refuse landfill and so on Waterproof for water conservancy facilities
Specification:
standard | GB18242-2008 |
characteristic | torched applied |
main ingredients | SBS modified bitumen |
temperature resistance | -25degree--95degree |
color | black/silver |
width | 1m |
length | 10m/roll, |
thickness | 3mm |
surface | PE film, aluminum foil, |
core material | PY/G |
Application:
1) Make sure the roof deck smooth, clean and dry (Moisture <9%), then coat the surface of your roof deck with a kind of bitumen paint till dry to start installation.
2) Two ways in installation:
First, heating and melting method----Heat the PE film of the membrane and roof deck surface by heating and melting method to nearly melted (not flowing), then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.
Second, cold-adhesive method-----Pour the cold adhesive homogeneously on the roof deck, the roll the membrane to install it to be fully stick to roof deck.
3) After installation, a full serious inspection is required to make sure no air bubble, no fold, no falling away to guarantee the waterproof life.
Features and advantage:
1.Flexibility provides extra protection at vulnerable areas
2.Excellent conform ability and consistent uniform thickness
3.Easily applied with no special equipment
4.Compatible with common pipe coatings
5.Excellent resistance to cathodic disbanding
6..Resistant to UV
7.Can be applied over a wide temperature range
Contact Person: Angela
Tel: 008615511775265