|
Product Details:
|
| Usage: | Roof,subway,pool,warehouse | After-sale Service: | Online Technical Support |
|---|---|---|---|
| Function: | Waterproof | Thickness: | 2MM3MM4MM |
| Packaging Details: | Pallets Or Customized | Example: | Free |
| High Light: | bituminous waterproofing membrane,bituminous sheet waterproofing |
||
SBS Coiled Material Elastomer Bitumen Waterproofing Membrane Waterproof Membrane
Production Description
(SBS) Elastomer modified waterproofing membrane is a polyester blanket or glass fiber mat as the fetus basis, styrene-butadiene-styrene (SBS) ,copolymer thermoplastic body as modification agent, the two sides is covered with polyethylene film, fine sand, powder or mineral material (in sheet) made of modified asphalt waterproofing materials.
SBS asphalt waterproof sheet
| Fetus basis | PY | G | |||
| Type | I | II | I | II | |
| Soluble content(g/square meter) | 5mm | 3500 | 3500 | ||
| 4mm | 2100 | ||||
| 3mm | 2900 | ||||
| Watertightness |
Pressure (MPa) ≥ |
0.3 | 0.2 | 0.3 | |
|
Holding time (Min)≥ |
30 | ||||
| Heat resistance(℃) | 90 | 105 | 90 | 105 | |
| No slip, flow, drop | |||||
|
Tension(N/500mm) ≥ |
Lengthways | 450 | 800 | 350 | 500 |
| Crosswise | 350 |
500 |
|||
The construction method
1.The base line of modified bituminous cold primer is covered at the base level. After drying, the paving line of waterproof rolling material is defined according to the base line of the waterproof rolling material that has been determined.
2.Spread the waterproof rolls along the paving line on the base, cut in size, and then roll back to the shop (naturally);
3. hot melt construction debugging good temperature of flame spray gun (burner or electric heating machine) for about 150 mm distance on the waterproof coiled material interface at the grassroots level and rapid baking coil and the grassroots, stay coil edge surface sol black and shiny, immediately roll adhesive.The rubber roller is used to control the air.
.
Storage and transportation and packaging
1.When storage and transportation, different types and specifications should be stacked separately, should not be mixed.
2.Avoid sun and rain, pay attention to ventilation;
3. the storage temperature should not be above 50 ℃, cube storage, height is not more than two layers;
When transported by ship or train, the coil must be placed and piled up not more than two floors, preventing incline or horizontal pressure, and covering the tent when necessary;
4.The storage period shall be 12 months from the date of production under normal storage and transportation conditions.
Scope of application:
It is suitable for the roofing and underground waterproofing works of industrial and civil buildings, especially for building waterproof works in low temperature environment.
Contact Person: Angela
Tel: 008615511775265
