Product Details:
|
Thickness: | 1.0mm-3.0mm | Width: | 1000mm |
---|---|---|---|
Roll Area: | 10m2,15m2,20m2 | Roll Weight: | Varied With Thickness And Roll Size |
Tension: | 200N | Cold Resistance: | -25 Degree |
High Light: | peel and stick roofing felt,peel and stick roofing paper |
Wind and Water Seal Polymer Modified Self Adhesive Roof Underlayment
Introduction:
Self adhesive roof underlayment is a self adhering mat, modified bituminous roofing membrane with polyester or fiberglass reinforced for use under tile, slate shingles, asphalt shingles. Its top surface can be smooth film, mineral granule, sand, Aluminum film,etc. Mineral granules or sand on surface can enhance skid resistant properties.
Benefits:
1. High adhesion for ease of application and elimination of water movement under the membrane.
2.Optimal for secondary waterproofing.
3.Applicable for use under any roofing material.
4.The rubberized asphalt will not crack or dry.
Storage:
1. Store rolls on horizontal position to prevent damage
2. Avoid direct sunlight and rain
3. Store rolls in a ventilated and clean dry location.
4.Overlapping guidelines are avaible for easy installation.
Fields of application:
Self-adhesive roof underlayment can be used as waterproofing layer for the roofing or underground projects, its full adhesive back make it pretty easy to apply. It is a best choice for your roof or underground projects, particularly in places where visible fire is prohibited.
Specification Data:
Tension | 200N/50mm |
Peeling strength | 25N |
Pole peeling strength | 110N |
Heat resistance | 90 degree, no flowing, no crack |
Cold resistance | -25 degree |
Thickness | 1,0mm-3,0mm |
Upper surface material | Smooth film/Aluminum film/Fine sand/Mineral granules |
Reinforcement | Polester fabric/fiberglass fabric |
Under surface | Black release film |
Contact Person: Angela
Tel: 008615511775265