Product Details:
|
Item: | Self Adhering Waterproofing Roll | Width: | 1000mm |
---|---|---|---|
Roll Area: | 215sq.ft. | Roll Weight: | Varied With Thickness And Roll Size |
Tensile: | 200N | Low Temperature Resistance: | -25 Degree |
High Light: | self adhesive roof underlayment,peel and stick roofing felt |
1.0mm Self-adhered Roof Underlayment Modified Bitumen Waterproofing Roll
Introduction:
1.0mm self-adhered waterproofing roll is a self-adhered underlayment that is thin and light weight, making it easier to apply. It offers premium protection against sever climatic conditions such as wind, rain and the build up of ice dams and is recommended to be used under most roofing materials and in a range of slopes including the very lowest and highest slope designs. This waterproofing roll has a quick release film, will not crack or dry out and is slip-resistant. This underlayment also has a rubberized asphalt layer that seals around roofing nails, allowing for a tight seal and added protection from the environmental changes.
Benefits:
1. High adhesion for ease of application and elimination of water movement under the membrane.
2.Optimal for secondary waterproofing.
3.Applicable for use under any roofing material.
4.The rubberized asphalt will not crack or dry.
Storage:
1. Store rolls on horizontal position to prevent damage
2. Avoid direct sunlight and rain
3. Store rolls in a ventilated and clean dry location.
4.Overlapping guidelines are avaible for easy installation.
5.High elongation, flexible, and accommodates to the contraction and expansion of the application surface.
Specification Data:
Tension | 200N/50mm |
Peeling strength | 25N |
Pole peeling strength | 110N |
Heat resistance | 90 degree, no flowing, no crack |
Cold resistance | -25 degree |
Thickness | 1,0mm |
Upper surface material | Smooth film/Aluminum film/Fine sand/Mineral granules |
Reinforcement | Polester fabric/fiberglass fabric |
Under surface | Black release film |
Contact Person: Angela
Tel: 008615511775265