|Usage:||Roof, Subway Waterproofing||Roll With:||1000mm|
|Reinforcement:||Fiberglass Fiber, Polyester Felt||Material:||SBS, Bitumen|
sbs elastomeric bitumen membrane,
self adhesive bituminous waterproofing membrane
3mm,4mm Hot Applied SBS Waterproofing Membrane Roofing Bitumen Products
it is SBS modified, torch-on elastomeric waterproofing membranes,with fiberglass ot non-woven spunbond polyester felt, both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones).
Fields of application:
it is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roof, water tanks, manmade pinds, retaining wallsm concrete channels as well as bathrooms and any wet surfaces.
Features and benefits:
1. applicable on different kind of surfaces at cold temperature because of high elastic property.
2. has high elongation and tensile strength
3. resistant to aggressive effect of the soil
4. easily applied to the details such as dilation
5. edges of chimney and parapet returns
10cm overtopping shall be alloed for joins and 15cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The
transverse joints of the first layer covering should be laid down in an offset position. For the top layer. longitudinal and transverse jointsof the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest.
|name||SBS modified bituminous waterproof membrane|
|usage||roof, wall, subway, tunnel etc. waterproofing|
|sub surafce||aluminum film, sand, slate|
|package||packed in rolls with pallet|
|loading quantity||600 rolls|
Contact Person: Angela