Product Details:
|
Use Area: | Roof, Wall, Tunnel,swimming Pool | Reinforcement: | Fiberglass, Polyester, Composite |
---|---|---|---|
Thickness: | 3mm | Roll Length: | 10m |
Roll Weight: | 42kg | Raw Material: | Sbs, Asphalt, Fabric |
High Light: | sbs modified bitumen membrane,sbs modified bituminous membrane |
Long Service Polyester Reinforced SBS Modified Bitumen Waterproof Membrane
Introduction:
SBS modified bitumen waterproof membrane, its base materials are polyester felt, or polyester felt reinforced with glass fiber, dipped and coated with SBS thermoplastic elastomer modified bitumen, both sides are covered with fine sand, mineral granular, PE film, aluminum foil.
Product features:
1. good waterproof performance
2. high tensile and tearing strength, elongation and size stability which accommodates substrate movement and deformation.
3. sbs modified bitumen waterproof membrane is better for building waterproof with low temperature
4. anti-puncture and rooting resistant, fatigue resistant, anti-corrosion, mildew resistant and weather resistant
5. easily operate with hot-melting method
Application:
1. roof and underground in industrial and civil buildings, wall, toilet
2. bridge, subway, tuuel, swimming pool, etc
3. waste landfill, sewage plant, irrigation system, etc
Attention:
make sure the roof deck smooth, clean, and dry (moisture<9%), then apply the surface of roof deck homogeneously with a kind bitumen paint, till dry to start application.
Storage and transportation:
1. separate storage for different models
2. temperature should be below 50degree
3. avoid direct sunshine, raim, keep ventilated
4. do not piled horizontally, keep stand and not more than 2 floors.
Contact Person: Angela
Tel: 008615511775265