1000mm Waterproofing Coiled Roll

3.5mm Torch Heated SBS Waterproofing Membrane Waterproofing Coiled Roll

Description:

This product is SBS modified, torch-heated elastomeric waterproofing coiled rolls,with fiberglass or non-woven spunbond polyester felt as reinforcements, both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored mineral granules.

Fields of application:

It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roof, water tanks, manmade ponds, retaining walls concrete channels as well as bathrooms and any wet surfaces.

Features and benefits:

1. Applicable on different kinds of surfaces at cold temperature because of high elastic property.

2. High elongation and tensile strengths.

3. Resistant to aggressive effect of the soil.

4. Easily applied to the details such as dilation.

5. Edges of chimney and parapet returns.

Application:

10cm overtopping shall be allowed for joins and 15cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The 

transverse joints of the first layer covering should be laid down in an offset position. For the top layer. longitudinal and transverse jointsof the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest.