3mm Fire Melted Polyester Reinforced SBS Waterproofing Membrane

Fire Melted Polyester Reinforced Sbs Modified Bitumen Waterproofing Membrane

Introduction:

SBS /APP bitumen waterproofing membrane is made by soaking the base in bitumen, or thermoplas ticityelastomer(such as styrene butadiene-SBS), or thermoplastics (such as atactic polypropylene-APP, APAO, APAL) modified bitumen, then covering double faces with elastomer(SBS)or thermoplastics(APP, APAO, APAL) modified bitumen, and last finiishing the upward face with fine sands, mineral slates(or grains) or polythene membrane etc, while downward face with fine sands or polythene membrane.

Product Features

1. Strong water impermeability.
2.High tensile strength, high elongation, strong adaptability to base layer shrinkage deformation and cracking.
3.Good low temperature performance, can maintain efficacy at -50 °C, suitable for hot and cold areas, especially in cold regions.
4.Puncture resistance, smash resistance, tear resistance.
5. Corrosion and mildew resistance. Good weather resistance.
6.Convenient construction, hot melt method can be operated in all seasons, and the joints are reliable.

Application:

1.Make sure the roof deck is smooth,clean and dry(Moisture<9%),then apply the surface of roof deck with a kind bitumen
paint till dry.
2. There are two methods in application:
One way is by heating and melting method---Heat the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.
The other way is by cold adhesive method---Pour the cold adhesive on the roof deck then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation as requested.
3.After application,, a full serious inspection is required,that's to make sure no air bubble,,no fold,,no falling away etc. and
guarantee the waterproof life.