|
Product Details:
|
| Item Name: | Self Adhesive Roof Underlayment | Product Composition: | Bitumen, SBS Rubber, Glue |
|---|---|---|---|
| Reinforcement: | Polyester Fabric/Fiberglass Fabric Or Non-reinforced | Top Surface: | Black Fine Sand |
| Back Side: | Silicon Release Film | Usage: | Roof,basement,swimming Pool,etc |
| Thickness Available: | 1.5mm-4.0mm | Form: | In Rolls |
| Roll Width: | 1000mm | Roll Length: | 10m,15m,20m |
| Overlap: | 10cm Or As Per Required | ||
| High Light: | 2.0mm Adhesive Roof Underlayment,sand surface Adhesive Roof Underlayment,2.0MM self adhering underlayment |
||
2.0mm Sand Surface Self Adhesive Roof Underlayment
Self adhesive roof underlayment introduction:
This self adhesive roof underlayment has a sand surface and is slip-resistant. Install as underlayment under shingles or tiles to prevent interior leaks. Product is self sealing around roofing nails. Its reinforcement canbe polyester fabric or fiberglass fabric or non reinforced.
Self adhesive roof underlayment advantages:
This roof underlayment has extra strength and durability. It is a highly versatile underlayment that provides superior waterproof inregreity and is an excellent second wall of defense against wid driven rain and seepage due to ice damming.
Self adhesive roof underlayment storage:
1.Non reinforced underlayment rolls need to be stored on horizontal position to prevent damage.
2.Polyester fabric or fiberglass reinforced rolls can be stored in vertical position.
3.Avoid direct sunlight and rain.
4.Store rolls in a ventilated and clean dry location.
Self adhesive roof underlayment data:
| Tensile strength | 200N/50mm |
| Peel strength | 25N |
| Pole peeling strength | 110N |
| High temperature resistance | 90 degree, no flowing, no crack |
| Low temperature flexible | -25 degree |
| Thickness | 1.5mm-4.0mm |
| Upper surface material | Black fine sand |
| Reinforcement | Polester fabric/fiberglass fabric or non reinforced |
| Under surface | Black release film |
Contact Person: Angela
Tel: 008615511775265
