1m Width Sbs Membrane With Fiberglass Or Polyester

SBS Modifie Torched On Elastomeric Waterproofing Membrane With Fiberglass Or Polyester

SBS waterproofing membrane introduction:

SBS (styrene butadinen styrene) modified, torch-on elastomeric waterproofing membranes with fiberlass or non woven spunbond polyester felt, both sides are coated with polyethylene film or one side coated with polythylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones).

Fields of application for sbs waterproof membrane:

sbs waterproofing membrane is used in curtain walls, foundations and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tamls. ,am,ade ponds, retaining walls, concrete channels as well as bathroom and any wet surfaces.

Feature and benefits of sbs waterproof membrane:

• Applicable on different kind of surfaces at coldtemperature because of high elastic property.
• Has high elongation and tensile strength.
• Resistant to aggressive effect of the soil.
• Easily applied to the details such as dilation,
• edges of chimney and parapet returns.

Application of sbs waterproofing membrane:

10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be laid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest.