Product Details:
|
Type: | Torched Waterproof Membrane | Application: | Roof, Balcony, Swaimming Pool,etc |
---|---|---|---|
Product Name: | Torched SBS Polymer Bituminous Elastomeric Bitumen | Material: | SBS Modified Asphalt |
Thickness: | Customized | Color: | Black |
Usage: | Outdoor | Applied Rooftop: | Flat Concrete Roof |
Lifespan: | More Than 20 Years | ||
High Light: | sbs bituminous membrane,modified bituminous membrane,10m length bituminous membrane |
SBS Modified Bituminous Waterproofing Membrane Sheet Waterproofing
SBS waterproofing membrane introduction:
As the name implies, these are membranes that arrive at the site in the form of rolls. These are then unfurled and laid on a firm surface. The most common type of sheet based membrane is a bituminous waterproofing membrane. This type of membrane is stuck to the substrare with a hot tat based adhesive using blowtorches.
Joints between adjacent membranes are also made with the same hot adhesive. The sheets are overlapped by about 100mm to form a waterproof joint. Some membranes are even joined by melting them with a hot air gun and then overlapping them on the previously laid sheet. With this type of membrane, joints between sheets are critical, and must be done perfectly to avoid leakage.
Where to use SBS waterproofing membrane:
This product is suitable for all kinds of industrial and civil building roof, basement, reservoirs, ponds, sewage treatment system, civil air
defense projects, channel, girder factory waterproofing. Especially for highways, railways and culverts, bridges and other water impermeable
concrete bridge deck construction.
SBS waterproofing membrane advantage:
1. High resistance to positive water & vapor pressure
2.Good dimensional stability under tension
3.Excellent flexibility
4.High puncture and fatigue resistance
5.Resists water borne checimals
6.Accommodates structural movement
SBS waterproofing membrane storage and consideration:
When storing and transporting, products of different specifications should be stacked seperately.
Avoid sun and rain, pay attention to ventilation. the storage temperature should not be higher than 45degree celsius, the height of the coil should not exceed 3 layers, and the vertical storage should be stacked in a single layer. The piercing and cutting operations should not be done after application.
Specifications:
Thickness | 3mm/4mm/5mm |
Reinforcement | polyester/fiberglass felt |
Surface | PE film/Grey slate |
Soluble content | 2900g/m2 |
Low temperature | -20degree |
Roll length | 10m |
Roll weight | Varies with thickness |
Rolls per pallet | Varies with thickness |
Pallet size | 1.1m*1.1m*1.1m |
Pallet per 20ft container | 20 pallets |
Loading quantity in bulk | Varies with thickness |
Contact Person: Angela
Tel: 008615511775265