|
Product Details:
|
| Type: | Torched Waterproof Membrane | Application: | Roof, Balcony, Swaimming Pool,etc |
|---|---|---|---|
| Product Name: | Torched SBS Polymer Bituminous Elastomeric Bitumen | Material: | SBS Modified Asphalt |
| Thickness: | Customized | Color: | Black |
| Usage: | Outdoor | Applied Rooftop: | Flat Concrete Roof |
| Lifespan: | More Than 20 Years | ||
| High Light: | mineral finish modified bituminous membrane roofing,torch down modified bituminous membrane roofing,felt modified bituminous membrane roofing |
||
Mineral Finish SBS Modified Bitumen Waterproof Mmebrane Torch Down Roof Felt
Cangzhou Jiansheng Building Waterproof Material Co.,Ltd offers premium quality SBS bitumen waterproof torch on felt roof cap sheet roofing felt for B2B importers and distributors worldwide. Cangzhou Jiansheng Building Waterproof Material Co.,Ltd is located in China and deals exclusively in the production and export of waterproof membrane.
SBS bitumen waterproof torch on felt roof cap sheet is made of bitumen and asphalt. Consumers can use it in roofing waterproofing.
Where to use SBS waterproofing membrane:
Bitumen, also known as asphalt, is a sticky, black and highly viscous liquid or semi-solid form of petroleum. Thanks to its waterproofing qualities, it is widely used in construction. Bituminous membranes are perfect for waterproofing roofs, basements, below-ground structures, bridges and other structures.
Benefits of SBS roofing membrane:
More and more roofing professionals have been turning to SBS coverage, and for good reason. Many older sealant processes fail to match up on many (if not all) of these benefits.
Traditional plastic-based roof sealants are often nowhere near flexible enough and can create cracks and other issues when a roof naturally moves.
Secondly, SBS membrane is easier, safer and cheaper to install.
SBS waterproofing membrane storage and consideration:
When storing and transporting, products of different specifications should be stacked seperately.
Avoid sun and rain, pay attention to ventilation. the storage temperature should not be higher than 45degree celsius, the height of the coil should not exceed 3 layers, and the vertical storage should be stacked in a single layer. The piercing and cutting operations should not be done after application.
Specifications:
| Thickness | 3mm/4mm/5mm |
| Reinforcement | polyester/fiberglass felt |
| Surface | PE film/Grey slate |
| Soluble content | 2900g/m2 |
| Low temperature | -20degree |
| Roll length | 10m |
| Roll weight | Varies with thickness |
| Rolls per pallet | Varies with thickness |
| Pallet size | 1.1m*1.1m*1.1m |
| Pallet per 20ft container | 20 pallets |
| Loading quantity in bulk | Varies with thickness |
Contact Person: Angela
Tel: 008615511775265
