-
Roofing Felt Roll
-
Asphalt Roofing Felt
-
Roofing Felt Paper
-
Asphalt Shingles Underlayment
-
SBS Waterproofing Membrane
-
Bitumen Waterproofing Membrane
-
SBS Modified Bitumen
-
Self Adhesive Bitumen Waterproof Membrane
-
Self Adhesive Roofing Felt
-
Asphalt Roofing Membrane
-
Adhesive Roof Underlayment
-
Roof Shingle Underlayment
-
Andrewyou provide us with good quality product and superior service. we witnessed the improvement and development of your company, each time we have any reqirement, you will try your best to make our satisfied. thanks for your cooperation.
Sbs Modified Self Adhesive Bitumen Waterproof Membrane Felt

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xRoll Length | 10m/15m/20m Or As Required | Roll Width | 1000mm Or As Required |
---|---|---|---|
Type | With/without Reinforcement | Reinforced | Polyester/Fiberglass Fabric |
Top Surface Color | Black/Green/Silver Or As Required | Back Surface | Black Release Film |
Function | Waterproof And Damp Proof | Use | Roof Underlayer Or As Top Layer |
Released Material | PET Release Film | How To Apply | Peel And Stick |
High Light | modified self adhesive bitumen waterproof membrane,sbs self adhesive bitumen waterproof membrane,sbs stick on waterproof membrane |
Self Adhesive Bitumen Waterproof Membrane SBS Modified Felt
Production description
Self adhesive bitumen waterproof membrane is made of polyester felt as the base felt, coated with elastomer SBS modified bitumen on both sides, and the upper surface is covered with insulating materials such as polyethylene film, fine sand or mineral granules. It is made of self adhesive rubber asphalt and a peelable silicone-coated black film as the isolation material. This product is suitable for waterproofing works of I and II grade buildings.
Specifications
Water impermeability pressure Mpa≥ | 0.3 |
Thickness mm | 1.3mm to 2.0mm or as required |
Softening point | 110 ℃ |
Operating Temperature short periods | -20℃ +90℃ |
Elongation % | ≥300 |
Tear Resistance N/50mm | ≥200 |
Pear Adhesion N/M | 1576 |
Flexbility | -20℃ |
Surface | Aluminum/Color PE Film |
Scope of use
1.Used for non-exposed roof and underground engineering waterproof layer;
2.Waterproofing of subways, tunnels, pools, reservoirs, canals,etc.
3.Applied in waterproofing projects where open flame is forbidden.
4.Better flexibility at low temperature, suitble for cold areas.
Product characteristics
1.Cold application: no opern flame is used, no pollution to the environment, it is an environmentally friendly product.
2.High tensile strength, large elongation, and strong adaptability to expansion, cracking and deformation of the base layer.
3. It can form a high-strength waterproof layer with strong resistance to pressure water.
It has excellent adhesion to the base, and the adhesion is often greater than the shearing force (fracture outside the bonding surface).
4. Polyester fiber felt used as tire base, fatigue resistance, puncture resistance and corrosion resistance.
5. The overall self adhesive asphalt coating has excellent low-temperature flexibility (-20 to -30 degree).
6. Good bonding performance and self adhealing function. The coil is fully bonded to the base layer, and the seam self bonding is synchronized with the life of the coil roll.
Packaging,Storage and Transportation
To rolled up the product by using plastic tape.
Avoid exposure to the sun and rain in storage and transportation and pay attention to ventilation. The coiled material should be standing and no more than two layers, with no more than 50 centigrade of storage temperature.
»Q1. What’s your product range?
A1:As a factory ,We mainly produce SBS membranes, waterproof coatings, geotextiles and other construction waterproof materials.
»Q2. Can I order samples?Are you free for samples?
A2: Yes, we will offer free sample. You pay the sample cost first, but we will pay you back when you make the bulk order later.
»Q3. What's your delivery time?
A3:We are manufacturer, so we can efficiently control the production time, usually our delivery time is 10-25 working days.
»Q4. What's your payment terms?
A4:30% on deposit, 70% balance against copy of B/L after loading. L/C is available.
»Q5. Can you produce the product according to customers’ requirements?
A5: Sure, we are professional manufacturer, OEM and ODM are both welcome.