Torch Applied 5mm Roofing Felt Roll For Concrete Roof

Torch Applied Sbs Modified Bituminous Waterproof Roofing Felt Roll For Concrete Roof

introduction of sbs waterproof roofing felt:

SBS/APP modified bitumen/asphalt waterproofing membrane is a widely used waterproof material with excellent performance, well suitable for the construction of industrial and civil building roofing, basement, wall, waterproof and moisture-proof and bridge, parking lot, swimming pool, tunnel etc. It is applicable for cold and hot areas, app especially applicable for high temperature or intense solar radiation areas.

features of sbs waterproof roofing felt:

1.Strong tensile strength, high elongation, good dimensional stability after heat treatment.

2.Excellent flexibility at low temperature, excellent resistance to the low and high temperature.

3.Excellent resistance to impact and perforation.

4.Excellent resistance to chemical etching.

5.Fireproof : the membrane extinguish immediately after away from the fire source.

6.Excellent resistance to the aging, long service life.

7.Service life: more than 20 years as roof waterproof material, more than 50years if used in underground waterproof .

where to use the sbs waterproof roofing felt?

1.Industrial and civil building roofing engineering waterproof, planting roofing, roof parking lot, roofing engineering;
2.Waterproof and moisture-proof of underground engineering of industrial and civil buildings and waterproof of indoor swimming pools and fire pools;
3.Subway, tunnel, concrete pavement bridge deck, sewage treatment plant, landfill and other municipal engineering waterproof;
4.Waterproof water conservancy facilities such as canals and pools.
 

storage of sbs waterproof roofing felt:

When storing and transporting, products of different specifications should be stacked separately.

Avoid sun and rain, pay attention to ventilation. The storage temperature should not be higher than 45 degrees Celsius, the height of the coil should not exceed 3 layers, and the vertical storage should be stacked in a single layer.

The piercing and cutting operations should not be done after application.