No Reinforced Self Adhesive Polymer Modified Asphalt Waterproof Coiled Roll
Self adhesive waterproof rolls are divided into no reinforcement and polyester reinforcement according to the material structure. See where you use it, in general, no reinforcement roll is recommended when use on roof waterproof, 2mm thickness is preferred. A protection layer is recommended after to make it more long lasting. If used for iron tile factory house, Aluminum finish self adhesive membrane is recommended because the iron factoy house is not suitable for protective layers, wihle Aluminum membrane can enhance the resistance of the coiled roll.
|Water impermeability pressure Mpa≥
||1.2mm to 2.0mm or as required
|Operating Temperature short periods
|Tear Resistance N/50mm
|Pear Adhesion N/M
||As per client's requirement
Scope of application
Suitable for non-exposed roof or underground projects ( including the excavation of the subway), while applicable to waterproof projects such as pools and water, especially for waterproof projects that are not allowed to use open flames.
Waterproof, anti-seepage, and moisture proof works for side walls, bottom plates, roofs and roofs of building basements.
1.High bond strength: The tackifying resin increases the bond strength of the membrane, so that the membrane is firmly bonded to the base layer. Strong adhesion, 5 degree can bond firm, no need to use heating equipment. Environmental protection, and simple installation.
2.Self healing: Fine cracking produced by the external stress can be well self-healing.
3.Durable adhesion:Lasting adhesion, does not fall off with the substrate, no water leak and the overlap joint is the same life with the membrane.
4.Wide temperature range: No flow in high temperature, no crack in low temperature.(-20 to 70 degree).
How to apply:
Grassroots cleaning→Brushing the grassroots treatment agent→Node strengthening teeatment→Positioning→Elastic line→Unrolling membrane→Rolling and exhausting→Overlapping treatment→Node sealing→Inspection and acceptance.
1.Sealed and packaged in special plastic bags, stored in a dry and ventilated environment to prevent sun and rain.
2.Different types and specifications should be stacked separately, and should not be inclined or cross-pressured.
3.Rolls should be laid flat, the stacking height should not exceed four layers, and the shelf life is one year.
4.Keep away from fire sources during transporation and storage.
»Q1. What’s your product range?
A1:As a factory ,We mainly produce SBS membranes, waterproof coatings, geotextiles and other construction waterproof materials.
»Q2. Can I order samples?Are you free for samples?
A2: Yes, we will offer free sample. You pay the sample cost first, but we will pay you back when you make the bulk order later.
»Q3. What's your delivery time?
A3:We are manufacturer, so we can efficiently control the production time, usually our delivery time is 10-25 working days.
»Q4. What's your payment terms?
A4:30% on deposit, 70% balance against copy of B/L after loading. L/C is available.
»Q5. Can you produce the product according to customers’ requirements?
A5: Sure, we are professional manufacturer, OEM and ODM are both welcome.