-
Roofing Felt Roll
-
Asphalt Roofing Felt
-
Roofing Felt Paper
-
Asphalt Shingles Underlayment
-
SBS Waterproofing Membrane
-
Bitumen Waterproofing Membrane
-
SBS Modified Bitumen
-
Self Adhesive Bitumen Waterproof Membrane
-
Self Adhesive Roofing Felt
-
Asphalt Roofing Membrane
-
Adhesive Roof Underlayment
-
Roof Shingle Underlayment
-
Andrewyou provide us with good quality product and superior service. we witnessed the improvement and development of your company, each time we have any reqirement, you will try your best to make our satisfied. thanks for your cooperation.
Polymer Modified 1x10m Reinforced Bitumen Membrane For Roofs

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xSize | 1mx10m/15m/20m | Thickness | 1.0mm,1.2mm,1.5mm,2.0mm |
---|---|---|---|
Reinforcement | Polyester Fabric/Fiberglass Fabric/No Reinforcement | Low Temperature Flexibility | -20 Degree/-25 Degree |
Surface | PE Film/Aluminum Film/Colored Film/Sand | Back Side Color | Black |
Ingredients | Bitumen, Glue | On Shelf | 12 Months |
High Light | 1x10m reinforced bitumen membrane,1x50m reinforced bitumen membrane,1x10m roofing waterproof membrane |
Polymer Modified Self Adhesive Bitumen Waterproof Membrane for Roofs
Production description
This kind of roofing waterproofing materials is self adhesive rubber modified bitumen waterproofing membrane. It is made of synthetic rubber and resin-modified bitumen with special modifiers, polyester fabric as reonforcement or no reinforced, polyethylene film/colored film/sand as surface material.
Specifications
Application areas
1. Balcony, bathroom, kitchen
2. Tunnels, Industrial roofs
3. Flat and sloped roofs
4. Basements, Foundation and retaining walls
5. Gardens, Bridges
Technical performance
Tension | 200N/50mm |
Elongation at max.tensile | 200% |
Tear strength of nail | 110N |
Heat resistance | 70 degree no flow |
Low temperature flexibility | -20 degree |
Impermeablility | 0.2MPA, 120min no leak |
Features and benefits
1.Strong adhesion.
2.Easy application.
3.High temperature resistance, low temperature flexibility
Installation procedure
Clean the substrate-Brush primer oil-Paving the membrane-Seal the overlapping joint.