Product Details:
|
Thickness: | 1.2mm/1.5mm/1.8mm/2.0mm | Length: | 10m,15m, 20m Or As Required |
---|---|---|---|
Back Surface: | Self Adhesive Glue With Release Film | Surface Material: | Black PE Film/Colored Film/Aluminum Film/Fine Sand Or As Required |
Usage: | Roof Waterproof Material | Function: | Moisture Proof, Waterproof |
High Light: | 1.8mm waterproofing membrane self adhesive,2.0mm flat roof self adhesive membrane,rubberized flat roof self adhesive membrane |
1.2mm 1.5mm 1.8mm 2.0mm Self Adhesion Rubberized Bitumen Waterproof Membrane
Introduction:
This product is a kind of self adhesion rubberized bitumen membrane. Its basic ingredients are SBS rubber, tackifier and high quality road petrleum bitumen.
Strong high-densitypolyethylene film or aluminum film is used as the upper surface material. On the lower surface is covered with silicon-coated isolation film.
Application area:
It is usually used as waterproof and damp proof materials on different substrates, especially on where open flame is not prohibited. It is also used as ice and water shield.
Benefits:
It is a new type of waterproof material with great development prospects.
It has the characteristics of low temperature flexibility, self-healing, and good bonding performance.
It can be constructed at room temperature ,fast in construction, and meets environmental protection requirements.
Guide to use:
When installation, peel off the release film and then stick it on the substrate. In order to strengthen its adhesion property, primer oil can be applied before membrane sticking.
Technical data
Index
|
Specification
|
Result | |||
Ⅰ | Ⅱ | ||||
1 | Tensile Strength | Tension (N/50mm) ≥ | 160 | 230 | |
Elongation of maximum tensile ≥ | 235 | ||||
Elongation at break ≥ | 235 | ||||
2 | Tear strength ≥ | 90 | 160 | ||
3 | Heat resistance | 90°C 2mm | |||
4 | Low temperature flexible/°C | -20 no crack | -30 no crack | ||
5 | Imperviousness | 0.2Mpa, 120min impermeable |
Advantages:
1.No adhesive is needed, no need to be heat or melt, just tear off the isolation layer, and it can be firmly bonded to the base layer.
2.Covenient construction and extremely fast construction speed.
3. With rubber elasticity, excellent elongation, well adapted to the defformation and cracking of the base layer.
Roof underlayment, damp proof, moisture proof.
Contact Person: Angela
Tel: 008615511775265